An air-conditioning gas leaking trouble is extremely hard and costly to resolve.
A preliminary step to determine gas leakage is by checking the gas stress level with a stress meter. If the stress meter reveals absolutely no, that is an indication of gas leakage since the compressor can never be cleared.
The air-conditioning service technician will certainly after pumping in the freon, either R22 to 68PSI or R410a to 135PSI to the air-conditioner, this relies on what cooling agent your air-conditioner takes in. You can examine what refrigerant your air-conditioner takes in by looking at the tag beside the fan coil system.
From there, the professional will certainly keep track of the gas level. If the pressure drops within a couple of days, weeks, or perhaps months, this is a verification indication of a gas leak since if the gas is top-up totally, it will last a minimum of a year. The price of leaking is also based on the dimension of the split.
So where is the leakage resource normally from?
The leak can be at the fan coil, inside the condenser, or the copper pipelines. The cracks are generally found at the joint soldering part as well as copper pipelines near the compressor. The split occurs when two copper pipelines touch each other and also as a result of the vibration of the running compressor, the copper pipelines will certainly fracture as well as the gas leak occurs.
There are a couple of approaches as well as tools utilized for determining leak resources.
- Hand-Held Cooling Agent Leakage Detector which identifies a leakage. A beep audio will certainly be listened to when it touches the copper pipe.
- Ultraviolet (UV) Dye which finds a leak by putting a colored dye right into the copper pipeline and the color will reveal where the leakage is.
- Soap as well as Water. Bubbles will develop when the soap as well as the water is put on the leakage site.
Once the leakage is located, below are the techniques to seal leaks:
- Compression Tape is utilized. The tape will certainly seal the leak source when the tape is positioned over the leakage area.
- Soldering. Soldering is a procedure in which 2 or even more steel products are collaborated by melting and also filling the leakage location with a filler metal.
In the approaches and also tools referenced above, repairing the leak may sound basic. Yet in fact, gas leaks are incredibly tough to spot as well as secure. Especially if the leakage resource remains in the copper pipelines, it is almost impossible to spot the leak as it is concealed inside the wall, and also it is really difficult to execute soldering to seal up the leakage resource.
It is important to note that in some cases, even after sealing the leak, the air-conditioner might still experience gas leakage again. This can happen due to the weakening of the copper pipes over time, vibration, or even faulty air conditioning installation. Therefore, it is crucial to engage a reliable and experienced technician who can properly diagnose the problem and provide a lasting solution.
It is also worth mentioning that gas leakage not only leads to higher energy consumption and costs but also poses a health risk to occupants. Refrigerant gases can cause headaches, nausea, and even asphyxiation in severe cases. In addition, refrigerant gases contribute to ozone depletion and global warming, which have serious environmental implications. Therefore, it is important to address gas leakage promptly to ensure the safety of occupants and reduce the impact on the environment.
